Maximum braided outer diameter

Φ50mm

Number of braided wires / ingot

Φ0.35mm(1-7strip)         Φ0.30mm(1-12strip)        Φ0.25mm(2-12strip)

Φ0.15mm(4-12strip)        Φ0.12mm(6-12strip)

Spindle speed

85RPM（The actual speed is determined by the braided wire and pitch. The factory value is set to 65rpm, which is the general best speed recommended by our company.)

Maximum production speed

1050m/h(Calculated according to the maximum production pitch x maximum speed, the actual speed is determined by the braided wire and pitch)

Pitch adjustment range

33-166mm   48-300mm  Stepless adjustment in sections (customized according to customer requirements)

Host control

AC variable frequency control host

Traction mode

Towing wheel traction / crawler traction

Specification of doubling roller

100mm*135mm (full copper wire ≈ 6kg)

Take up motor power

Torque motor 380V 1.1KW (simple)

Braid description

1. Braided wire can be soft copper wire, aluminum magnesium alloy wire, stainless steel wire, polyester wire, cotton thread, etc;

2. The elongation of soft copper wire is not less than 10-17%, and the elongation of aluminum magnesium alloy wire is 3-5%;

3. The elongation of stainless steel wire is 38-45%; Tensile strength 700-730mpa (in φ 0.20mm)

Main motor power

Knitting machine: 380V 5.5kw  

Equipment selection 

1. One host

2. A set of simple independent take-up and setting out frame / a set of end shaft take-up, arrangement and setting out frame

3. One set of wire drawing machine

4. One set of 12 head untwisted paying off frame

5. Traction wheel (standard configuration, suitable for wire diameter below 30mm)/ φ 1250 traction wheel traction (foundation excavation required, optional) /800kg crawler traction (optional)

The remarks of special requirements shall be clearly put forward at the time of signing the contract after both parties reach an agreement, otherwise it is invalid to put forward afterwards