Contact us

Vertical knitting machine


Technical parameters | model

16 spindle open high speed knitting machine    (KM16-180QHDE)

Maximum braided outer diameter


Number of braided wires / ingot

Φ0.25mm(1-7strip)   Φ0.15mm(1-13strip)    Φ0.12mm(2-13strip)
Φ0.08mm(3-13strip)  Φ0.05mm(4-13strip)

Spindle speed

180RPM (The actual speed is determined by the braided wire and pitch. The factory value is set to 150rpm, which is the general best speed recommended by our company.)

Maximum production speed

570m/h   (According to the maximum production pitch x maximum speed, the actual speed is determined by the braided wire and pitch)

Pitch adjustment range

Change the gear between 5.35-65.3mm and adjust it in stages

Host motor

380V    1.1KW



Coil specification


Skeleton specification


Pay off reel shaft hole


Total weight of machine



Equipment configuration

1. New easy maintenance circuit device 2. Pitch adjustment device

3. Frequency conversion control device 4. Electronic monitoring disconnection device

5. Longitudinal wrapped metal belt breaking monitoring device 6. Braided wire tension adjustment device

7. Freely adjust the width of the take-up reel 8. Automatic stop device for broken braided wire

9. Automatic refueling device               

Description of braided silk

1. Braided wire can be soft copper wire, aluminum magnesium alloy wire, stainless steel wire, polyester wire, cotton thread, etc;

2. The elongation of soft copper wire is not less than 10-17%, and the elongation of aluminum magnesium alloy wire is 3-5%;

3. The elongation of stainless steel wire is 38-45%; Tensile strength 700-730mpa (in φ 0.20mm).

Remarks on special requirements

The remarks of special requirements shall be clearly put forward at the time of signing the contract after both parties reach an agreement, otherwise it is invalid to put forward afterwards